Dishwasher not Drying Your Dishes?

If your dishwasher has a stainless steel tub, you probably need rinse aid. Sure, your dishwasher could be the best, highest-efficiency model. It still needs rinse aid. Rinse aid helps dry dishes by reducing water droplet formation. (Note: If you have a plastic tub and your dishes aren’t drying, you might need a service call on the heating element.)

If you’ve added rinse aid to your dishwasher and your dishes still come out wet, check if you’re washing a lot of plastic dishes. Sometimes these can exacerbate the problem. Have you ever noticed that plastic dishes often come out with droplets of water while all your glass and porcelain dishes are completely dry? That’s because plastic does not hold heat the same way regular dishes do.

Why does that matter? It throws the dishwasher off its drying mojo. Here’s how the dishwasher drying process works:  The final rinse water reaches a very high temperature which heats up your dishes. The stainless steel tub is a cooler surface, so the moisture collects on the tub rather than your dishes.

Other things that throw the dishwasher off its drying mojo:

• Washing all the dishes before you load them. Scrape off large food pieces, but just say no to washing your dishes before you wash them! If the dishes are clean, your smart dishwasher cuts the wash time down. If this happens, the dishwasher may not have time to get hot enough. The water is heated to more than 40 degrees higher than the hot water being piped in.
• You’re using the light or quick wash cycles for everyday stuff. It won’t usually wash or dry as well.

Taken from Warners’ Stellian